Rail Pod SP1S for Power or Sailboats

Includes Stainless Steel Rail Clamps to Suit 1, 1.125 and 1.25 Inch Rails (SP1S)

Mounting Angle Can Be Adjusted on Installation

Max Usable Face 117.47 x 117.47mm (4.625" x 4.625")

Max Cut Out Area 104.77 x 104.77mm (4.125" x 4.125")

A Seaview instrument pod for sailboats. This pod has a usable face of 117.47 x 117.47mm (4.625" x 4.625") and maximum cut out area of 104.77 x 104.77mm (4.125" x 4.125").

Comes with two high polished stainless steel clamps. Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.

The SPOD is a pod for powerboats, sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.

The stainless steel clamp will suit 1", 1.125" and 1.25" (25.4, 28.57 and 31.75mm) rails.

Close up view of a stainless steel clamp (supplied)

• SP1S Installation Instructions
• SPOD Dimensions