Maxwell HWC3500 12 Volt Horizontal Anchor Winch / Windlass 1200W Motor - Suits most Boats to 21m (Chain Wheel and Drum) (P13093)
Maxwell HWC3500 12 Volt Horizontal Anchor Winch / Windlass 1200W Motor - Suits most Boats to 21m (Chain Wheel and Drum) (P13093)
- $12,154.00
-
$9,995.00
- OR -
Great deals on shipping anchor winches Australia wide!
Australia's Best Price on Maxwell HWC3500 12 Volt Horizontal Anchor Winch / Windlass 1200W Motor - Suits most Boats to 21m. It has a side Chain Wheel for 10mm or 13mm SL chain (which suits chain only - please specify preferred chain size). It also has a separate side rope warping drum suitable for most rope types and sizes. (P13093)
overview
Maxwell HWC3500 - 12 Volt Horizontal Anchor Winch/Windlass
1200W / 12 Volt Motor - Suits 10mm or 13mm SL Chain (Please specify)
Suits Most Boats up to 21 Metres (69 feet)
Maxwell HWC3500 12 Volt Horizontal Anchor Winch / Windlass has a 1200W Motor - and is suitable for most boats up to 20m (69 feet). It has a side Chain Wheel (gypsy) suitable for for 10mm or 13mm SL chain (chain only - one chain size only - please specify) as well as a separate side warping rope drum suitable for most rope types and sizes.
The HWC Series is designed for automatic horizontal handling of chain only anchor rodes while offering a separate side warping drum / capstan for the retrieval of a secondary rope and chain rode.
Includes:
- Dual Direction Solenoid (included)
- Chain pipe and chainwheel to suit chain size specified (included)
- Emergency crank/clutch release handle (included)
- Up/Down remote control panel (not included)
- Circuit breaker/isolator panel (not included)
Features:
- Fully automatic single or dual direction chainwheel operation, for use with chain only rodes
- Functional rope hauling from fore and aft using independent fluted stainless steel (AISI 316) snag-free warping drum with clutch disengagement of chainwheel for positive control of all ropes
- Optional dual anchor handling with smooth independent control of each chainwheel via cone clutches
- Chain pipe assembly supplied
- Cone-type clutch/brake mechanism permits manual ‘free fall’ anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement ensuring safe and precise operator control
- Chainwheel locking pawl to assist when using warping drum independently
- Simple deck mounted installation with no under deck parts
- Simplified maintenance with ability to strip the running gear (chainwheel and drum) from the windlass without disturbing the windlass mounting
- Heavy duty, dual direction motor, designed for marine winches
- Chainwheel and warping drum of high-quality chrome finish over marine-grade bronze
- Marine-grade alloy casing pretreated, powder coated and finished with a two component white polyurethane paint
Options:
- AutoAnchorâ„¢ Equipment
- Foot Switches
- Chain Stopper*
- Up/Down remote control panel
- Hydraulic motor
- Compact Remote
- Roving remote
- Maxwell Deck Switches and Circuit Breakers
- Maxwell Helm Up/Down Panels
- Maxwell Chain and Rode Counters
- Hand Held Remote Controllers (Wired and Wireless) - (all brands)
- Maxwell Reversing Solenoids
- Rope/Chain Kits – Pre-spliced for smooth operation
- Chain Stoppers
- Snubbing Devices
Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.
Downloads:
- Maxwell Electrical Accesssories Guide
- Maxwell HWC 3500 Product Guide
- Installation Manual Maxwell HRC3500 (with Footprint & Wiring Info)
Also available with Rope Capstan
Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.
Downloads:
specification
Model | HWC3500 | HWVC3500 |
---|---|---|
Maximum Pull | 1590kg 3500lbs |
1590kg 3500lbs |
Static Hold | 2200kg 4840lbs |
2200kg 4840lbs |
Chain Size (Short link) |
10-13mm 3/8" - 1/2" |
10-13mm 3/8" - 1/2" |
Line Speed (Normal working) |
15m/min 50ft/min |
10m/min 33ft/min |
Power Supply (DC) | 12 or 24V | 12 or 24V |
Motor Power | 1200W | 1200W |
Net Weight (Electric) | 57kg 125lbs |
94.5kg 208lbs |
Hydraulic Pressure | 138bar 2000psi |
138bar 2000psi |
Hydraulic Flow | 40 l/min 11 USgal/min |
40 l/min 11 USgal/min |
Net Weight (Hydraulic) | 49kg 107lbs |
80kg 176lbs |
DIMENSIONS
Model | HWC3500 | HWVC3500 |
|
---|---|---|---|
A | 515mm 20 9/32" |
515mm 20 9/32" |
|
B | 316mm 12 7/16" |
446mm 17 9/16" |
|
C | 549mm 21 5/8" |
710mm 28" |
|
D (Hole centres) | 260mm 10 1/4" |
417mm 18 7/16" |
|
F (Hole centres) | 308mm 12 1/8" |
464mm 18 1/4" |
|
G (Approximate hole centres) | 348mm 13 11/16" |
348mm 13 11/16" |
|
H (Working height of drum for rope warping) | 53mm 2 3/32" |
53mm 2 3/32" |
|
I | 130mm 5 1/8" |
130mm 5 1/8" |
|
J | 208mm 8 3/16" |
287mm 11 19/64" |