Maxwell AA730 Hand Held Roving Windlass Control and Chain Counter - Wired Remote with 3.5M Cable (P102994)
Maxwell AA730 Hand Held Roving Windlass Control and Chain Counter - Wired Remote with 3.5M Cable (P102994)
Maxwell AA730 Roving Controller and Chain Counter - LCD Screen - IP67 - Suits 12V, 24V, AC and Hydraulic Systems
- $1,468.00
-
$1,229.00
- OR -
Australia's Best Price on Maxwell AA730 Hand Held Roving Control and LCD Display Chain Counter - Wired Remote with 3.5M Cable (P102994)
Suits: AC, DC and Hydraulic Systems, Windlasses/Anchor Winches, Thrusters, Lights, Davits, Self Furling Sail Systems
overview
Maxwell AA730 Hand Held Roving Control and Chain Counter
Wired Remote with 3.5M Cable
Tough waterproof remote control with LCD for marine equipment with chain counter: * Windlasses * Thrusters * Lights * Anchorwash * Davits * Passerelles *
Kit includes one handheld console unit with cradle, one base station, a deck socket with 2m lead, a socket sealing cap, one sensor, 2 magnets, screws for the cradle and socket, installation and operation instructions.
Features
- 4 metres spiral cable
- Electrical protection against back-emf
- Rubber over-moulding for shock protection and grip
- Stowage on cradle
- Operation in parallel with all AutoAnchor products eg toggle switches, foot switches or other control equipment
- Connect to DC, AC and hydraulic systems
- Rugged cable and connectors with:
- Moulded plug and socket rated to IP67
- 2m flying lead from socket for better connectivity
- Gold plated contacts on plug and socket to reduce corrosion
- Socket sealing cap
- Present the length of rode to deploy
- Plus Windlass Control with Chain Counter
- Counts rope/chain or all-chain rode
- AA703 Base StationChoice of feet, metres or fathoms measurement
- Logs windlass operating hours for maintenance
- Easy calibration
- Electronic diagnostics for troubleshooting installation
- Auto stop and docking alarm when the anchor is close to docking
- Two speed operation
Options:
- SP4156 - 6.5 metre (21 ft) Sensor Cable Pack
- SP5022 - 10 metre (33 ft) Sensor Cable Pack
- SP4157 - 15 metre (49 ft) Sensor Cable Pack
- SP4153 - 20 metre (65 ft) Sensor Cable Pack
- SP5017 - 35 metre (115 ft) Sensor Cable Pack
- SP4192 – Gender Adaptor (for joining 2x Sensor Cables)
Downloads:
specification
- Current Consumption: 50mA
- Power Supply: 12/24V DC
- Temperature Range: 23°F to 140°F (-5°C to 60°C)
- Output Maximum Current Draw: 12V DC: 3.5A 24V DC: 3.5A
- Output Minimum Current Draw: 12V DC: 10mA 24V DC: 20mA - When connecting to solid stage switching or other low current windlass drive, a PLC or AC variable frequency drive, a dummy resistor load may be required.
- IP Rating: IP67
- Outputs: 6
- Rode – Chain Only: Stainless or galvanised steel
- Rode – Rope and Chain: Must have a minimum of 10ft (3m) of chain. Chain must be galvanised steel. Rope should be a good quality nylon anchor rope. Type 66 or equivalent
- EMC/Protection/CE: EN60945
- For DC windlasses a dual direction solenoid is required.