overview

Quick Hot Water Heater 30L - 230VAC and Heat Exchange (FLB33013S000A00)

1300W Element - AISI316 Grade Stainless Steel Tank

Includes Thermostatic Mixing Valve pre-fitted

495 L x 381 H x 360 Ø mm

The Quick "Nautic Boiler B3" series of Marine Hot Water units, use both an electric immersion heater, perfect for hot water when connected to shore power in a marina, and a heat exchanger that takes hot water from the engine cooling system and uses it to heat the water in the unit. These units have storage capacities of 15 up to 80 litres available.

The Quick Water Heaters are constructed using high quality materials and feature a casing in composite material and stainless steel inner tank. The tank and fittings are made from 316 marine grade stainless steel for strength, durability and corrosion resistance. The 316L stainless steel brackets for either base (deck) mount or bulkhead mount applications which makes the Quick Water Heaters one of the most versatile on the market. The B3's can me installed at any angle from horizontal to vertical.

Electrical heating elements are made of Incoloy® and rated at 1200 Watts, allowing hot water production when engine heat is not available but when 230 volts AC is available.

Features:

• The Heat Exchanger used for Quick "Nautic Boiler B3” is AISI 316L stainless steel. The heat exchange capacity is notably higher than that achieved from other manufactures having wide exchange surface.
• The Tank is made of 1.5 mm gauge AISI 316 stainless steel welded with Argon shielding gas and hence highly resistant to corrosive agents.
• The Thermal Insulation is high density polyurethane foam injected between the cover and tank giving excellent heat retention properties.

Includes Thermostatic Mixing Valve Kit - This allows the user to pre-set the hot/cold water mix at the tank, allowing water to come out of the tap at just the right temperature without wasting water trying to set the right temperature. Great water saving device on hot water systems.

Downloads:

• Quick Nautic Boiler Marine Hot Water System Manual

Spare Parts:

• Quick Replacement Over Temperature Cut-Out Thermostat
• Quick Water Heater Replacement Element 240Volt 1200 Watts
• Quick Hot Water Element also available in 220VAC 500W

Options:

• FLB31512S000A00 - 15 Litre - Quick - Marine Hot Water System
• FLB32012S000A00 - 20 Litre - Quick - Marine Hot Water System
• FLB32512S000A00 - 25 Litre - Quick - Marine Hot Water System
• FLB34012S000A00 - 40 Litre - Quick - Marine Hot Water System
• FLB36012S000A00 - 60 Litre - Quick - Marine Hot Water System
• FLB38012S000A00 - 80 Litre - Quick - Marine Hot Water System

specification