overview

Rule 500 GPH Round Pump - 24 Volt 0.9 Amp

Bilge Pump - Suits 20mm Hose - 31LPM (RWB112)

We ship Australia wide - ask us for a quote!

Rule electric submersible bilge pumps, float switches and accessories are manufactured to the highest standards. Rule are world leaders and the innovators in bilge pump design and construction and have won many industry innovation awards. Rule pumps have set the standard for the industry for many years and are the first choice of pleasure boat owners, boat manufacturers and commercial fishermen throughout the world. Rule manufacture bilge pumps to suit boats of all sizes from small runabouts to large yachts and cruisers. They are available in automatic or non-automatic versions. Capacities listed on the following pages are US gallons per hour at open discharge. Amp draws listed are at 12 volt. Amp draw at 13.6 volts (fully charged battery) will be higher than shown. Rule pumps are backed by Rule's 3 year limited warranty on bilge pumps 2 year warranty on float switches except for SuperSwitch which has 5 year warranty.

Rule 360 & 500 Bilge Pumps
Compact submersible electric pumps for use as bilge or bait pumps. Totally submersible pumps with water cooled, ignition protected motors, stainless steel shaft and snap-off strainer bases. These pumps are extemely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. 3 year limited warranty.

Rule 500 Bilge Pumps

• 500 GPH - 31 Litres per minute
• Compact - 89mm H x 61mm W
• 12 volt DC - low 1.9 amp draw
• 24 volt DC - low 0.9 amp draw
• Hose outlet suits 20mm hose

Options: (see links below)

• Pump Filters
• Hose Fittings and Connectors
• Control Switches and Float Switches
• Strainers and Strum Boxes
• Valves
• Skin Fittings
• Vented Loops
• Accumulator Tanks
• Deckwash Accessories
• Pumps

specification

Rule Pump Performance Chart
This pump performance chart is an approximate guide to the output of various Rule pumps at various pumping heights. The left hand column shows the height in metres that the pump will push water to, and the bottom horizontal column shows output in US gallons per hour at the various pumping heights.
Rule electric submersible bilge pumps will not lift water - they will only push it up. They must be submersed in the water. Output, water flow and pumping height will vary depending on battery and type of installation.