Isotherm - Hose Tail Kit to Suit Isotherm Slim and Basic TP0105K Hot Water Heaters - SFA00001AA (135640)
Isotherm
Isotherm - Hose Tail Kit to Suit Isotherm Slim and Basic TP0105K Hot Water Heaters - SFA00001AA (135640)
Optional item as new Water Heaters Do Not Include Tails
-
Online Price: $238.00 (including 10 % GST tax)
- OR -
Australia's best price on Indel- Webasto Hose Tail Kit to Suit Isotherm Hot Water heaters (SFA00001AA)
overview
Indel-Webasto Hose Tail Kit to Suit Isotherm Hot Water Heaters SFA00001AA
(Optional item as new Water Heaters Do Not Include Tails)
Isotherm® Water Heater Hose Tail Kit
Set of five brass tails to provide connection of hoses from both engine cooling system and fresh water supply to Isotemp Slim, Basic & Regular TP0105K Hot water heaters.
Kit includes:
- 2 x 16mm barbed tails with 1⁄2" BSP internal thread
- 2 x 13mm straight tails with 1⁄2" BSP internal thread
- 1 x 13mm barbed tail with 1⁄2" BSPM external thread
- The engine connection tails accept 16mm hose and the fresh water connections accept 13mm hose.
Downloads:
specification
Fittings :
Isotemp tanks now use a 1/2” Pipe Thread that is compatible with US standard 1/2” NTP Tapered and will mate with the typical plumbing adapters available at most hardware stores and chandlers.Tapered fittings get tighter and seal as they are threaded together. This is what we normally expect to see.
The threads on older style tanks and the threads on the mixing valves and pressure relief valves are BSP ( British Standard Pipe) with Parallel (Not tapered threads) BSP fittings do not seal as they are threaded together and require a sealant such as Locktite 242 or 248 to make a leak free connection.
It is possible to mate a Male NTP fitting to a Female BSP - but not the other way around! to convert a Male BSP to a Female BSP use a 1/2" Pipe Coupling