overview

Panda 5000i.Neo

5kVA (4.0kW) - 230V-50Hz

Load Dependent Variable Speed Technology 2200-3000 RPM

Diesel Powered - Remote Control - Super Silent Insulation

High Starting Capacity - Extremely Light and Compact - Easy install

iSeries Marine Generators

The new iSeries Generators take full advantage of modern diesel engines designed to run at lower speeds and meet current emission standards. In the past two years Fischer Panda has developed its own diesel engine enabling them to offer a water-cooled 4 kW marine generator with all required certifications. The new 5000i.Neo iSeries generator features the Fischer Panda water-cooled FPE320 single cylinder engine.

Like all Fischer Panda inverter generators with variable speed control, the new model "Panda 5000i.Neo" is characterised by its high efficiency, quiet operation and compact design. Another advantage of the new inverter technology is the significant reduction of exhaust emission and fuel consumption.

Panda iSeries generators are the first of the next generation of compact, super silent and powerful generators while supplying extremely stable voltage and frequency and high starting capacity for air conditioning loads. When weight distribution plays a critical role, two smaller iSeries parallel generators can be installed onboard. Their power can be combined to provide the same performance which would only be available using a single large generator.

Fischer Panda iSeries generators are fitted with the highly regarded super silent sound insulation and dual circuit freshwater cooling via heat exchanger. These generators have been especially designed to be light and compact with up to 30% in weight and space savings.

High Performance

The high starting performance for inductive loads such as air conditioning and diving compressors. The clean sinus wave form with its accurate voltage and frequency regulation ensures a stable and efficient power supply for sensitive electronic devices.

• High starting capacity for air conditioners/dive compressors with a maximum inrush current of 100A for 8.3 ms which means that it isn’t needed to select big generators for the start-up currents.
• Highly efficient - maximum energy
• Pure sinus wave which is ideal for sensitive electronics
• Reliable power supply- 230V AC output

Features:

• Load dependent variable speed technology: 2200-2800RPM (1500-2700RPM for the 45i)
• Compact installation due to small size and low weight
• Highly efficient, maximum energy
• Environmentally friendly with low fuel consumption
• Easy installation reduces costs, all connectors pre-fitted to base
• Dual circuit freshwater cooling via heat exchanger
• Pure sine wave is ideal for sensitive electronics
• Electronic controlled voltage and frequency regulation
• Voltage stability 230Vac ± 3%
• Frequency stability 50Hz ± 2%
• Parallel connection of two iSeries generators of the same model
• Panda iControl LCD display; dual remote panel options available
• Electric starting, auto starting capable
• Automatically stops under alarm state
• Warranty – 1 year commercial use / 2 years private use

Includes:

• SP33337030 - Cooling water expansion bottle
• SP33337324 - Pierburg 12V remotely mounted fuel lift pump
• SP33337608 - Remote iControl and monitoring panel
• SP33337616 - PMGi 5000 Inverter

Panda iControl - Remote Control Panel Included

Includes Cooling Water Expansion Bottle, Remote Mount 12V Fuel Pump and PMGi 5000 Inverter

Variable Speed Technology

The Panda iSeries generators have been especially designed to be compact, quiet and powerful - with up to 30 % weight and space savings! They are ideal for yacht owners who require low operating sound levels and vibrations. The generators are characterised by their modern, innovative and environmentally friendly inverter technology. The generators can be connected in parallel and synchronised - no additional cables are required.

The speed of the diesel engine is adjusted according to the user’s changing power requirements while the output voltage always remains constant from the inverter. Variable speed control considerably reduces exhaust emissions and fuel consumption in comparison with a traditional generator with a fixed speed. The maximum speed of the engine is 3000 rpm. The electric load is provided with a constant output voltage of 230V/50 Hz via an inverter.

• Small size and low weight - compact installation
• High starting capacity for air conditioners/dive compressors with a maximum inrush current of 100A for 8.3 ms
• Highly efficient - maximum energy
• Variable speed - load-dependent
• 230 V AC output - reliable power supply
• Pure sinus wave is ideal for sensitive electronics
• Easy to install - no forced air circulation required in machine room
• Environmentally friendly - low fuel consumption
• Optional CAN SAE J1939 interface

Parallel connected iSeries - the high performance solution for even more comfort and safety

Several iSeries generators of different types can be easily connected in parallel. Extra cables or additional cabinets are not required. Each generator is fully independent and can be individually operated.

• Multiple generators can be easily connected in parallel - even if they have different outputs (using parallel inverters - available as option)
• Load-Sharing: both generators are equally loaded when operating in parallel
• Ideal for applications (multihulls - catamarans, trimarans) which may benefit from installing various smaller generators to improve weight distribution

Typical Parallel connected iSeries - the high performance solution for even more comfort and safety

Perfect sine wave

Fischer Panda® asynchronous generators supply a particularly clean sine wave and have achieved the best results during numerous tests in this category. This is essential for supplying power to sensitive electronic equipment, charging equipment and computers.

New iControl2 Panel and Engine Controller

Designed by Fischer Panda for the iSeries generators. The control panel allows the generator to be operated from the cabin and displays current status and technical data. The new panel is compact so it can be installed on small dashboards.

• Digital display
• New iControl2 features capable of logging and reading more data.
• Automatic start function which allows the generator to be started by an external electrical impulse. For example: A battery monitor module could measure the battery level and gives a signal to start the Fischer Panda i-generator automatically starts if it is under a preset value.

Compact, Lightweight and Quiet

Fischer Panda® are known around the world for class-leading compact marine and vehicle diesel generators. Featuring a highly efficient water cooling system Fischer Panda® generators are renowned for being lightweight, reliable and extremely quiet.

A diverse range of performance generators ranging in output from 4.0kW to 170kW are available in configurations to suit any application.

For efficient running, Fischer Panda® utilise a highly effective cooling system to ensure temperatures within the sound capsule remain within an acceptable range even in tropical conditions. Eliminating the requirement for free flowing cooling air improves sound insulation and greatly reduces engine noise. All Fischer Panda® marine generators employ a freshwater dual circuit cooling system to cool the diesel motor and the generator. A traditional seawater heat exchanger, manufactured from high quality alloy, cools the recirculating fresh water coolant to maintain constant temperature and optimise performance. Fischer Panda® vehicle generators use an external radiator which circulates normal engine coolant.

Super silent sound insulation

Fischer Panda® marine generators up to 25kVA are supplied with a GRP (Glass-Reinforced Plastic) sound insulation capsule lined with 3D sound absorbing material. This provides a sound level that is one of the lowest decibel outputs achievable for diesel generators. Optional 4D sound insulation material is available if even lower noise level is required. Marine generators above 25kVA are supplied with a stainless steel MPL (Metal Professional Line) sound capsule. The MPL casing consists of flat panels which are easy to dismantle and remove so that all parts of the generator can be accessed. Generators from 6.8kW can be supplied with the MPL capsule at an additional cost.

Water cooled engine and alternator

One of the reasons for the superior efficiency of Fischer Panda® is the very effective cooling system. It ensures that temperatures inside the sound capsule remain in an acceptable range in all conditions. At the same time, it achieves the best possible sound insulation as external cooling air flow is not required.

To prevent galvanic corrosion, Fischer Panda® use a dual circuit cooling system for generator and engine. The engine and generator are cooled by engine coolant. Seawater only comes into contact with the heat exchanger which is made from corrosion resistant cupronickel alloy.

Marine Installation Kits - To keep the installation as simple as possible, Fischer Panda offers complete installation kits. The kits comprise all components that are needed for the complete installation of the cooling water, exhaust gas, and fuel systems of the genset. The installation kits by Fischer Panda are available in two versions. See the Download section for more detailed information on installation kits.

• Basic version -The basic version contains all components required for a standard installation
• Premium version - The premium version additionally contains an exhaust gas/water separator unit for greater demands concerning noise reduction. The exhaust gas/water separator unit strongly reduces the exhaust noise. The "water splash" in particular is eliminated. Additionally, the exhaust gas/water separator unit functions as an exhaust gas goose neck, which prevents the water from flowing back into the generator.

Options:

• 337450 - Standard service kit 1 to suit 5000i
• 55-21.03.10.011P - Service kit plus 1 to suit 5000i
• 55-21.03.04.080S - Basic installation kit to suit 5000i - 15000i
• SP33337436 - Engine mount to suit 4800i & 5000i
• 55-21.03.04.057S - Premium installation kit to suit 5000i - 15000i
• SP33336980 - Diesel fuel filter 5 micron
• SP33336984 - Marine grade diesel fuel filter 5 micron
• 55-21.02.02.132P - iControl 2 slave panel
• 55-21.03.10.045P - Service kit plus to suit 4800i
• Exhaust Systems

Downloads:

• Fischer Panda Generator Installation Kits
• Fisher Panda Generator Service Kits
• Fischer Panda 4K-5K-7K Manual

Dimensions: 422L x 450W x 508H

Weight:  75kg

N.B. Dimensions and weights are approximate values only. Please confirm current dimensions and weights when ordering.

specification

Disclaimer: The information contained here is to the best of our knowledge accurate at the date of publication. All products are subject to continuous development and Fischer Panda GmbH reserves the right to alter technical specifications without prior notic