overview

BEP Marinco DCSM Systems Monitor (80-600-0021)

2.8” Colour LCD Display / Battery Input Voltage 12-24VDC / Charge/Discharge Amps for up to two banks

Capacity remaining in A/h and % / Battery Condition

Fresh, Grey Or Black Tank fluid level / Circuit status

DC Systems Monitor (DCSM) Designed and manufactured by BEP, these state of the art full colour monitors are made to meet the systems monitoring requirements of today’s modern Boat- Yacht-vessel and Caravan, Motor-Home or recreational vehicle. Complex and DC electrical installations on board are becoming more common place.
Additionally the increase in tank monitoring requirements for fuel, fresh, grey and black water, accurate monitoring of these systems is essential.
The DCSM display features clear, extra large type face. This allows for more detailed on-screen information and increased clarity. The screen has back lighting for easy night time viewing.

Display Type - Configure the DCSM to show the data in analogue, digital and graphic form.

Circuit Status - View the status of important circuits (on/off) In graphic and numeric  form

DC Power Meter:

• Displays voltages of multiple battery banks (0-32VDC).
• Displays charge and discharge (amps) of 1 x battery bank (*or  2 battery banks if extra shunt and cable are added).
• Displays battery capacity in amp hours.
• High/Low level alarms

Tank Level - View tank level information for multiple tanks in numeric and graphic forms. Resettable when leaving the boat.

Specifications:

• 2.8" Colour QVGA LCD
• Input voltage 8-32VDC
• Dimensions: Width 90mm x Height 100mm
• Backlit keypad

Monitors:

• Charge/discharge amps for two* banks (*needs extra shunt - see below)
• Capacity remaining in A/h and %
• Battery condition
• Tank fluid level
• Circuit status

Includes:

DCSM Comes with Shunt and Cable to suit 1 x battery bank:

• 1 x 5m x two core pre-terminated screened cable -  Installation Cable Kit  (113403)
• 1 x 450 Amp x 50mV Shunt (113457)

Options:

NB: *To add more battery banks one of each of the parts below are required for each battery bank (i.e. 1 x 113403 and 1 x 113457)

• 1 x 450 Amp x 50mV Shunt (113457)
• Installation Cable Kit  (113403)
• BEP Systems Monitor (Surface Mount) - Inc Shunt (80-600-0021-00 - 113386)
• BEP Systems Monitor (Surface Mount) - Metre Only (80-600-0022-00 - 113385)
• BEP Systems Monitor (Panel Mount) - Inc Shunt (80-600-0027-00)

DC Systems Monitor Panel Mount Version

NB: To add tanks to monitor, add one programmable sender unit - TS1 Ultrasonic Tank Sender #113361 for each tank.

• BEP Ultrasonic Tank Sensor (TS1) Pre-Programmed (113361)

Downloads:

• Download DC Monitor Dimensional Drawing
• Download DC Monitor Wiring Diagram
• Download DC Monitor Installation Manual
• Download Ultrasonic Tank Sender Unit TS1 Instruction Manual
• Download Ultrasonic Tank Sender Unit TS1 Programming Form

specification

Specifications:

• 2.8" Colour QVGA LCD
  
• Input voltage 8-32VDC
• Dimensions: Width 90mm x Height 100mm
• Back lit keypad

Monitors:

• Charge/discharge amps for two banks
  
• Capacity remaining in A/h and %
• Battery condition
• Tank fluid level
• Circuit status

Features:

• 8 Generic, user configurable inputs
• Programmable high/low audio / visual alarms for volts, amps and tank levels
• Backlit keypad and dimmable screen
• Can be panel or surface mounted

NB: DCSM Comes with Shunt and Cable to suit 1 x battery bank:

• 1 x 5m x two core pre-terminated screened cable (113403)
• 1 x 450 Amp x 50mV Shunt (113457)

NB: To add more battery banks one of each of the above parts are required for each battery bank (i.e. 1 x 113403 and 1 x 113457)

NB: To add tanks to monitor, add one programmable sender unit - TS1 Ultrasonic Tank Sender #113361 for each tank.