overview

Auto Anchor AA730 Hand Held Roving Control with Chain Counter (AA730)

Wired Remote with 4M Spiral Cable and LCD Display

LCD Screen - Suits all 12V, 24V or Hydraulic Winches

Tough waterproof remote control with LCD for marine equipment with chain counter.

Windlasses | Thrusters | Lights | Anchorwash | Davits | Passerelles

Kit includes one handheld console unit with cradle, one base station, a deck socket with 2m lead, a socket sealing cap, one sensor, 2 magnets, screws for the cradle and socket, installation and operation instructions.

Features

• 4 metres spiral cable
• Electrical protection against back-emf
• Rubber over-moulding for shock protection and grip
• Stowage on cradle
• Operation in parallel with all AutoAnchor products eg toggle switches, foot switches or other control equipment
• Connect to DC, AC and hydraulic systems
• Rugged cable and connectors with:
• Moulded plug and socket rated to IP67
• 2m flying lead from socket for better connectivity
• Gold plated contacts on plug and socket to reduce corrosion
• Socket sealing cap
• Present the length of rode to deploy
• Plus Windlass Control with Chain Counter
• Counts rope/chain or all-chain rode
• AA703 Base StationChoice of feet, metres or fathoms measurement
• Logs windlass operating hours for maintenance
• Easy calibration
• Electronic diagnostics for troubleshooting installation
• Auto stop and docking alarm when the anchor is close to docking
• Two speed operation

Downloads:

• AA730 Owner's Manual
• AA730 Quick User Guide
• Wiring Diagram for Chain Only Windlasses
• Wiring Diagram for Rope and Chain Windlasses
• Wiring Diagram for AC and Hydraulic Windlasses
• Wiring Diagram for Thruster
• Wiring Diagram for Multiple AA Products

specification

• Current Consumption:50mA
• Power Supply:12/24V DC
• Temperature Range:23°F to 140°F (-5°C to 60°C)
• Output Maximum Current Draw: 12V DC: 3.5A 24V DC: 3.5A
• Output Minimum Current Draw:12V DC: 10mA 24V DC: 20mA
  • When connecting to solid stage switching or other low current windlass drive, a PLC or AC variable frequency drive, a dummy resistor load may be required.
• IP Rating: IP67
• Outputs: 6
• Rode – Chain Only: Stainless or galvanised steel
• Rode – Rope and Chain: Must have a minimum of 10ft (3m) of chain. Chain must be galvanised steel. Rope should be a good quality nylon anchor rope. Type 66 or equivalent
• EMC/Protection/CE: EN60945

For DC windlasses a dual direction solenoid is required.